The cable doesn't need to follow a straight line-it may lie loosely on the tabletop between computers,run under floor,or run in a conduit.Although,wiring for a thin Ethernet appears to be completely different than the wiring for a thick Ethernet,the two schemes share several important properties.Both thick and thin cables are coaxial,meaning that they shield signals from outer interference.Both thick and thin cables requires termination,and both use the bus topology.Most important,because two wiring systems have similar electrical characteristics,that means signals propagate along the cable is in the same way.
Wednesday, February 18, 2009
Thin Ethernet Wiring
A second generation of Ethernet wiring uses a thinner,more flexible cable than the original thick wiring.Formally named as a 10 Base2 and informally named as thin wire Ethernet or Thinnet.This wiring scheme differs from Thicknet wiring scheme in three important ways.First,Thinnet generally costs less to install and operate than Thicknet.Second,because the hardware that performs the transceiver function is built into the NIC,no external transceivers are needed.Third,Thinnet does not use an AUI cable to attach the NIC to a communication medium.Instead,Thinnet attachs directly to the back of each computer using BNC connector.In a Thinnet installation,a coaxial cable stretches between each pair of machines.
The cable doesn't need to follow a straight line-it may lie loosely on the tabletop between computers,run under floor,or run in a conduit.Although,wiring for a thin Ethernet appears to be completely different than the wiring for a thick Ethernet,the two schemes share several important properties.Both thick and thin cables are coaxial,meaning that they shield signals from outer interference.Both thick and thin cables requires termination,and both use the bus topology.Most important,because two wiring systems have similar electrical characteristics,that means signals propagate along the cable is in the same way.
The cable doesn't need to follow a straight line-it may lie loosely on the tabletop between computers,run under floor,or run in a conduit.Although,wiring for a thin Ethernet appears to be completely different than the wiring for a thick Ethernet,the two schemes share several important properties.Both thick and thin cables are coaxial,meaning that they shield signals from outer interference.Both thick and thin cables requires termination,and both use the bus topology.Most important,because two wiring systems have similar electrical characteristics,that means signals propagate along the cable is in the same way.
Labels:
Communication,
Computer Networks,
Data Transmission
Monday, February 16, 2009
Twisted Pair Ethernet
This type of Ethernet wiring is known as Third Generation of Ethernet wiring.This generation is completely differ from its previous two generation that are thick and thin Ethernet because it does not use a coaxial cable.This generation Ethernet typically known as twisted pair Ethernet or TP Ethernet and its first version was formally known as 10BaseT.The wiring for Fast Ethernet is known as 100BaseT,and wiring for Gigabit Ethernet is known as 1000BaseT.Instead of shared medium,the new technology extends the idea used with connection multiplexing in which an electronic device serves as the center of the network.
The basic electronic device is known as an Ethernet Hub.Like the other wiring schemes,twisted pair requires each computer to have a network interface card and a direct connection from NIC to the network.The connection uses unshielded twisted pair wiring with RJ-45 connectors which are the largest versions of the modular connectors used with the telephones.The connector on one end of a twisted pair cable plugs into the network interface on a computer and the connector on the other end plugs into the hub.
Thus,each computer has a dedicated connection to the hub device.Electronic components in hub emulate a physical cable,making the entire system operate like a conventional Ethernet.For ex:A computer attached to a hub must have a physical Ethernet Address that means each computer must use the CSMA/CD to access the network and the standard Ethernet Frame Format.In fact,software does not distinguish between thick Ethernet,thin Ethernet and twisted pair Ethernet because the network interface handles the details and hides any differences.
The basic electronic device is known as an Ethernet Hub.Like the other wiring schemes,twisted pair requires each computer to have a network interface card and a direct connection from NIC to the network.The connection uses unshielded twisted pair wiring with RJ-45 connectors which are the largest versions of the modular connectors used with the telephones.The connector on one end of a twisted pair cable plugs into the network interface on a computer and the connector on the other end plugs into the hub.
Thus,each computer has a dedicated connection to the hub device.Electronic components in hub emulate a physical cable,making the entire system operate like a conventional Ethernet.For ex:A computer attached to a hub must have a physical Ethernet Address that means each computer must use the CSMA/CD to access the network and the standard Ethernet Frame Format.In fact,software does not distinguish between thick Ethernet,thin Ethernet and twisted pair Ethernet because the network interface handles the details and hides any differences. Sunday, February 8, 2009
The Berkeley Broadcast Address Form
The University of California at Berkeley developed and distributed an early implementation of TCP/IP protocols as a part of BSD UNIX.The BSD implementation contained a non-standard feature that has affected many subsequent implementations.Instead of using a host suffix of all ones to represent a directed broadcast address,the Berkeley implementation used a host suffix that contained all zeros.The address form is informally known as Berkeley Broadcast.Unfortunately,many computer manufacturers derived their early TCP/IP software from the Berkeley implementation,and a few sites still use Berkeley broadcast.Some implementations include a configuration parameter that can select between the TCP/IPTCP/IP standard and Berkeley form;many implementations are built to accept both standard and Berkeley broadcast address forms.
Saturday, February 7, 2009
Directed Broadcast Address
Sometimes,it is convenient to send a copy of a packet to all hosts on a physical network.To make broadcast easy,IP defines a directed broadcast address for each physical network.When a packet is sent to network's broadcast address,a single copy of the packet travels across the internet until it reaches the specified network.The packet is then delivered to all the hosts on the network.The directed broadcast address for a network is formed by adding a suffix that consists of all 1 bits to the network prefix.
To ensure that each network can have directed broadcast address,IP reserves the host address that contains all 1 bits.An administrator must not assign the all ones host address to a specific computer or the software may malfunction.If a network hardware supports broadcast,a directed broadcast will be delivered using the hardware broadcast capability.In such cases,transmission of the packet will reach all computers on the network.When a directed broadcast is sent to a network that does not have hardware support for broadcast,software must send a separate copy of the packet to each host on the network.
To ensure that each network can have directed broadcast address,IP reserves the host address that contains all 1 bits.An administrator must not assign the all ones host address to a specific computer or the software may malfunction.If a network hardware supports broadcast,a directed broadcast will be delivered using the hardware broadcast capability.In such cases,transmission of the packet will reach all computers on the network.When a directed broadcast is sent to a network that does not have hardware support for broadcast,software must send a separate copy of the packet to each host on the network. Friday, February 6, 2009
Authority for Addresses
Throughout an internet,each network prefix must be unique.For networks connected to the global internet,an organization obtains network numbers from the communication company that supplies internet connections.Such companies are called Internet Service Providers(ISPs).Internet Service Providers coordinate with a central organization,the Internet Assigned Number Authority,to ensure that each network prefix is unique throughout the entire Internet.For a private internet,the choice of the network prefix can be made by organization.To ensure that each prefix is unique, group that builds a private internet must decide how to coordinate network number assignments.Often,a single network administrator assign prefixes to all networks in the company's internet to ensure that numbers are not duplicated.
Thursday, February 5, 2009
Loopback Address
IP defines a loopback address used to test network applications.Programmers often use loopback testing for preliminary debugging after a network application has been created.To perform a loopback test,a programmer must have two application programs that are intended to communicate across a network.Each application includes the code needed to interact with TCP/IP protocol software.Instead of executing each program on a separate computer,the programmer runs both program on a single computer and instructs them to use a loopback IP address when communicating.
When one application sends data to another,data travels from the protocol stack to the IP software,which forwards it back up through the protocol stack to the second program.Thus,the programmer can test the program logic quickly without needing two computers and without sending packets across a network.IP reserves the network prefix 127/8 for use with loopback.The host address used with 127 is irrelevant that means all host addresses are treated the same.By convention.programmers often use host number 1,making 127.0.0.1 the most popular form of loopback.During loopback testing no packets ever leave a computer that means the IP software forwards packets from one application program to another.Consequently,the loopback address never appears in packet traveling across a network.
When one application sends data to another,data travels from the protocol stack to the IP software,which forwards it back up through the protocol stack to the second program.Thus,the programmer can test the program logic quickly without needing two computers and without sending packets across a network.IP reserves the network prefix 127/8 for use with loopback.The host address used with 127 is irrelevant that means all host addresses are treated the same.By convention.programmers often use host number 1,making 127.0.0.1 the most popular form of loopback.During loopback testing no packets ever leave a computer that means the IP software forwards packets from one application program to another.Consequently,the loopback address never appears in packet traveling across a network. Wednesday, February 4, 2009
Subnet and Classless Addressing
As the Internet grew,the original classful addressing scheme became a limitation.On one hand,the IP address space was being exhausted.On the other hand,because all networks had to choose one of the three possible sizes,that means many addresses were unused.Two new mechanisms were invented to overcome the limitations,known as subnet addressing and classless addressing.These two addressing schemes are so closely related that they can be considered to be a part of single abstraction.The generalization is straight forward that means instead of having three distinct address classes,allow the division between prefix and suffix to occur on an arbitrary bit boundary.Let understand this situation with the help of an example,Consider a network that contains 9 hosts.Only four bits of host suffix are needed to represent all possible host values.However,a class C address,which has the fewest address hosts possible,devote eight bits to the host suffix.Classless addressing solves the problem by allowing an ISP(Internet Service Provider) to assign a prefix that is 28 bits long that means network can have up to 14 hosts.
Subscribe to:
Posts (Atom)
