Tuesday, February 3, 2009

Protocol for Internetworking


As all we know that may protocols have been adapted for use in an internet,one suite stnds out as the most widely used for internetworking.The suite is formally known as The TCP/IP Internet Protocols.TCP/IP was the first set of protocols develop for use in an internet.Indeed,researchers who devised TCP/IP also developed the internet architecture.Work on TCP/IP began in 1970s,approximately the same time that Local Area Networks were being developed.The U.S military funded much of the research on the TCP/IP and internetworking through the Advanced Research Projects Agency.The military was among the first organizations to have multiple physical networks.Cosequently,the military was among the first to realize the need for universal service.By the mid-1980s,the National Science Foundation and the other U.S government agencies were funding development of TCP/IP and a large internet that was used to test the protocols.

Monday, February 2, 2009

Art of Protocol Design

Although the techniques needed to solve specific problems are well known,protocol design is on-trivial for two reasons.First to make communication efficient,details must be chosen carefully that means small design errors can result in incorrect operation,unnecessary packets or delays.For example:sequence numbers are usually stored in a fixed field in a packet header.The field must be large enough so sequence numbers are not reused frequently,but small enough to avoid wasting unnecessary bandwidth.Similarly,a higher level protocol can cause excessive overhead if the protocol chooses a non-optimal message size.

Second,protocol mechanism can interact in unexpected ways.For example:Consider the interaction between flow control and congestion control mechanism.A sliding window scheme aggressively use more of the underlying network bandwidth to improve throughput.A congestion control mechanism does,the opposite by reducing the number of packets being inserted to prevent the networking from collapsing.

The balance between sliding window and congestion control can be tricky,and a design that does both well is difficult.A protocol that is too aggressive about using bandwidth can adjust the underlying network and a protocol that is too conservative can result in lower throughput then necessary.More important,designs that attempts to switch from aggressive to conservative whenever congestion occurs tend to oscillate - then slowly increase their use of bandwidth until the network begins to experience congestion,decrease use until the network becomes stable and then begin to increase again.

Saturday, January 31, 2009

Understanding Protocol Suites

After knowing the importance of protocol in communication,designers have chosen to divide the communication problem into sub pieces and to design a protocol for each of the sub piece instead of having a single giant protocol that specifies complete details for all possible forms of communications.Doing so makes each protocol easier to design,analyze,implement and test.The main advantage of dividing communication software into multiple protocols increases flexibility because it allows subsets of protocols to be used as added.The division into separate protocols must be chosen carefully to ensure the resulting communication system is efficient and effective.To avoid duplication of effort,each protocol should handle part of the communication problem not handled by other protocols.

To make efficient implementation possible,protocols should be designed so that,they can share data structures and information.Finally,the combination of protocols should handle all possible hardware failures or other exceptional conditions.Now the main question that arises in front of us is that how can one guarantee that protocols will work together.The answer of this question lies in an overall design plan that means instead of developing each protocol in isolation,protocols are designed and developed in complete,cooperative sets called suites or families.Each protocol in a suite solves one part of the communication problem;together they solve the entire communication problem.Furthermore,the entire suite is designed to make interactions among protocol efficient.

Friday, January 30, 2009

Need for Protocols

As all we know that basic communication hardware consists of mechanisms that can transfer bits from one point to another.However,using raw hardware to communicate is analogous to programming by entering 1s and 0s but it is cumbersome and inconvenient.To aid programmers,computers attached to a network use complex software that provides a convenient,high level interface for applications.The software handles most low level communication details and problems automatically,making it possible for applications to communicate easily.Thus,most application programs rely on network software to communicate that means hey do not interact with network hardware directly.All parties involved in a communication must agree on a set of rules to be used when exchanging messages and such type of agreement is known as protocol.This term is also applied to computer communications meaning of which "a set of rules that specify the format of messages and the appropriate action required for each message is known as a network protocol or a computer communication protocol."The software that implement such rules is called as protocol software.

Wednesday, January 28, 2009

Significance of Internetworking and TCP/IP

Internetworking has become one of the most important ideas in modern networking.In fact,Internet Technology has revolutionized computer communication.Most large organizations already use internetworking as the primary computer communication mechanism.Smaller organizations and individuals are beginning to do so well.More important,in addition to private internet,the TCP/IP technology has made possible a global internet that reaches schools,commercial organizations,and government and military sites in all populated countries around the world.The worldwide demand for internetworking products has affected most companies that sell networking technologies.

Competition has increased because new companies have been formed to sell hardware and software need for internetworking.In addition may companies have modified their protocol designs to accommodate internetworking.In particular,most network protocols were originally designed to work with one network technology and one physical network at a time.To provide internetworking capabilities,companies have extended the designs in two ways:the protocols have been adapted to work with many network technologies and new features have been added that allows the protocols to transfer data across internet.

Tuesday, January 27, 2009

Public and Private Networks

When applied to a network,the term public refers to the availability of the service,not to the data transferred.In particular,most public networks provide private communications i.e when a computer sends a message across a public network,only the intended recipient receives the copy.Some public networks permit a group of computers to communicate analogous to a telephone conference hall.However,the public network doesn't use the broadcast technology.That is,the public network doesn't have a broadcast address nor it does forward broadcast packets.

The chief advantage of a private network is that owner has full control over both the technical decisions and policies.In addition to this it also have some disadvantages like a large private network can be expensive to install and maintain.In addition to purchasing the network hardware,a corporation must hire and train a staff to install,manage and operate the network.

On the other hand the chief advantage of a public network are flexibility and the ability to use state of the art networking without maintaining the technical expertise. public network is flexible because an arbitrary subscriber at a arbitrary location can connect to the network at any time.Furthermore,connections between a computer owned by one organization and a computer owned by another can be made broken the same way a public telephone system allows voice connections to be made or broken

Friday, January 23, 2009

Concept of ISDN

Integrated Services Digital Network(ISDN) is launched by telephone companies and used to provide large scale digital services to subscribers.ISDN provides digitized voice and data to subscribers over conventional local wiring.ISDN uses the same type of twisted pair copper wiring as the analog telephone system.If we discuss from the subscribers point of view then ISDN offers three separate digital channels designated B,B and D(usually written 2B+D).The two B channels operates at a speed of 64 Kbps,are intended to carry digitized voice and data or compresses videos, on the other hand the D channel which operates at 16 Kbps,is intended as a control channel.In general,a subscriber uses the D channel to request services which are then supplied over the B channels.The subscriber can also use the D channel to manage a session that is in progress or to terminate a session.Finally,both the B channels can be combined or bonded together to produce a single channel with effective data rate at 128 Kbps.The 2B+D channels are known as ISDN Basic Rate Interface(BRI).Infact,ISDN uses a form of time division multiplexing to provide the illusion of multiple channels of data to travel over a single pair of wires.